FLOW RATE | 200/400/600 Nml/min ± 10% a 2000 m slm (possibility to connect in parallel up to 4 stacked generators) |
TECHNOLOGIES EMPLOY | HT PEM electrolytic cell |
OUTPUT PRESSURE | 2 - 8 bar ± 3% /30 - 116 psi ± 3% |
PURITY | 99,9999 % Oxygen < 1 ppm |
MOISTURE’ | Better than -70° C dew-point ATP at 20°C |
REQUIREMENTS OF DEMINERALIZED WATER | Required resistivity >1 MΩ cm @25°C; ASTM Type II Advised resistivity >10 MΩ cm @25°C; ASTM Type I |
ELECTRICAL SUPPLY | 115/230 VAC (+/– 10%) 50-60 Hz HyGen 200: 110W HyGen 400: 180W HyGen 600: 250W |
INDEX OF PROTECTION | IP20 |
NOISE | < 50 dBA |
OPERATING TEMPERATURE | 5°C - 35°C / 40°F - 95°F |
ENVIRONMENTAL HUMIDITY | max 90% without condensation |
MAX ALTITUDE | 2000 m slm |
DIMENSIONS | Height: 40 cm + 7 cm (base) /15.8” + 2.8” Width: 38 cm/14.9” Depth: 53 cm/20.8” |
WEIGHT | 30 kg/67 lbs |
PNEUMATIC CONNECTIONS | Hydrogen output : G 1/8” female AISI 316 Exhaust: quick coupling for plastic pipe 4 mm Input demineralized water: flexible hose with ¼” connection |
The Brezza product range incorporates all of Claind's experience in the production of gas generators. The new PEM (Proton Exchange Membrane) technology allows Claind's hydrogen generators to achieve top performance in terms of purity and pressure while keeping the reliability and sturdiness of the products intact. The nitrogen generators, on the other hand, are based on the exclusive PSA system, which is capable of providing nitrogen without the need to wait for the initial purification. A passion for technology and design, attention to the customer's needs, style and product quality are the key factors of the Brezza line.