FLOW RATE | 1500 NmL/min ± 10% a 2000 m slm |
TECHNOLOGIES EMPLOYED | PSA + catalitic reactor Pl/Pd |
OUTPUT PRESSURE | 0 - 5 bar/0 - 72 psi ± 3% |
PURITY | HCT < 0,1 ppm CO2 residual < 1 ppm |
MOISTURE | < -70 °C dew-point ATP ± 2°C ATP |
AIR INPUT CHARACTERISTICS | Particulate ≤ 0,01 mm Oil vapors ≤ 0,01 mg/m3 Moisture ≤ 3° C dew point ATP min pressure: bar/115 psi Air flow rate: 8 Nl/min |
ELECTRICAL SUPPLY | 115 Vac ±10% 60 Hz 250W 230 Vac ±10% 50 Hz 250 W |
INDEX OF PROTECTION | IP20 |
NOISE | < 50 dBA for the 98% of operation time < 60 dBA for 2 sec. each cycle |
OPERATING TEMPERATURE | 5°C fino 35°C (41°F fino 95°F) |
ENVIRONMENTAL HUMIDITY | max 90% without condensation |
MAX ALTITUDE | 2000 m slm |
DIMENSIONS | Height: 40 cm + 7 cm/15.8” + 2.8” Width: 38 cm/14.9” Depth: 53 cm/20.8” |
WEIGHT | 28 kg/62 lbs |
PNEUMATIC CONNECTIONS | Compressed air inlet: G 1/8” female Purified air output: G 1/8” female |
The Brezza product range incorporates all of Claind's experience in the production of gas generators. The new PEM (Proton Exchange Membrane) technology allows Claind's hydrogen generators to achieve top performance in terms of purity and pressure while keeping the reliability and sturdiness of the products intact. The nitrogen generators, on the other hand, are based on the exclusive PSA system, which is capable of providing nitrogen without the need to wait for the initial purification. A passion for technology and design, attention to the customer's needs, style and product quality are the key factors of the Brezza line.