claind4you 
Features
- Silent: noise levels reduced to minimum by a special soundproofing and anti- vibrations solution, designed specifically for the laboratory and clinical environments
- "SCROLL" OIL FREE Compressor
- Equipped with Electronic Speed Control: the automatic speed regulation proportional to the flow delivered guarantees high production capability and a stable supply.
- Energy saving: greater efficiency in terms of air produced compared to electricity consumption to ensure 30% saving compared to equivalent systems thanks to an advanced power optimization software based on user requirements
- Universal 230 Vac 50/60 Hz single phase 2,k kW
- Delivers up to 210 l/min FAD of compressed air and a pressure up to 9,5 bar
- Outlet Dew Point from -20° to -60°C: equipped with a built-in membrane dryer able to ensure a low dew point and supply nitrogen generators or special medical equipment
- Able to feed all LCMS Generator units
- Built-in air reservoir (2 of 15 litres each) and possibility of adding an external one
- Highly compact and provided with all the control devices. It's Plug&Play.
- Ethernet and WIFI communication available as series, communication protocol MOD-BUS and MQTT, that allow the remote control from PC, tablet or smart-phone and the real-time monitoring of operating parameters of the generators
Technical specifications
|
FLOW RATE |
190 Nl/min (210 l/min FAD) @ 7 bar |
|
TECHNOLOGIES EMPLOYED |
Oil free SCROLL compressor |
|
OUTPUT PRESSURE |
6 ÷ 9,5 bar |
|
AIR OUTPUT CHARACTERISTICS |
Particulate = 0,01 mm Moisture up to-60°C Dew point ATP @ 9,5bar 50Nl/min |
|
ELECTRICAL SUPPLY |
230 Vac± 10% 50/60 Hz 2,5kW |
|
INDEX OF PROTECTION |
IP20 |
|
NOISE |
Minimum: 54 dBA Medium: 58 dBA |
|
OPERATING TEMPERATURE |
5°C - 40°C/40°F - 100°F |
|
STORAGE TEMPERATURE |
5°C - 50°C/40°F - 125°F |
|
ENVIRONMENTAL HUMIDITY |
max 90% withoutcondensation |
|
MAX ALTITUDE |
Tested up to 2000 m from the sea level |
|
DIMENSIONS |
L x D x H cm 68 x 83 x 79,5 27,8” x 32,5” x 31,5” |
|
WEIGHT |
148 kg/330 lbs |
|
ENVIRONMENT HEAT DISPERDED |
2340 J/sec |
|
PNEUMATIC CONNECTIONS |
|
|
ELECTRICAL CONNECTION |
IEC309 mobile plug, 2 poles plus 32A blue earth IP44 with 5 mt cable |
|
DATA CONNECTOR |
RJ45 |
|
WARRANTY |
2 years from Delivery |
|
OPTIONALS AVAILABLE |
- 433.30.Z000 – Hot Air transfer Kit - 433.30.Z020 – Installation Kit AIRCOMP200 Nitro-LCMS - 250.30.B116 – 100 L (1/2”) Tank Kit |
- For LCMS, LAB pneumatics, GC–TOC, Atomic Absorption and all Analyzersl ooking for Oil Free Dry Air
The Brezza product range incorporates all of Claind's experience in the production of gas generators. The new PEM (Proton Exchange Membrane) technology allows Claind's hydrogen generators to achieve top performance in terms of purity and pressure while keeping the reliability and sturdiness of the products intact. The nitrogen generators, on the other hand, are based on the exclusive PSA system, which is capable of providing nitrogen without the need to wait for the initial purification. A passion for technology and design, attention to the customer's needs, style and product quality are the key factors of the Brezza line.
- Innovative design and a vertical housing system so that less space is occupied
- Touchscreen technology and possibility to connect with the LAN network
- Wide product range for all laboratory needs
- PEM technology for hydrogen and PSA for nitrogen
